PF- metal joint with right Angle internal thread (all copper plated nickel)

Copper nickel plating is nickel plating on a copper substrate.Nickel plating can be divided into electroplating nickel and electroless nickel plating.After the copper nickel plating can prevent the migration of copper atoms, if the direct chromium plating on the copper substrate, copper atoms will migrate the chromium coating, resulting in copper coating.Inactivity of nickel can protect copper from oxidation.After the plating work in the atmosphere and alkali solution chemical stability, not easy to change color, more than 600 degrees Celsius before oxidation.High hardness, easy to polish, the disadvantage is porous.In a lot of products (especially iron and steel), in the substrate to plating a layer of nickel, the purpose is not only to facilitate subsequent plating of other metals, there are relatively strong adhesion and wear resistance.

        不得超过最 大，压力限制、温度、湿度、易腐蚀度应该控制在使用范围内。不能损伤蛇皮，损伤纱管，有问题的接缝要靠专家进行修理，自己不能随意拆卸。不锈钢快速接头的特点1。

        省时省力：通过高速接头连接切割和油路时，操作简单，节约时间和人力．2．节省油:在折油路时,快速接头上的单项阀可关闭油路,油不流出,避免油液的液压损失。环保：快速接头折断喷咀万向接头定制连接时，油不会泄漏，保护环境．4．设备设计独特,运输方便:需要大型设备或易不锈钢直通接头定制于携带的液压工具,使用快速接头分解后运输,到达目的地后组装使用.5经济:以上的各种优势都为客户创造了经济价值。不锈钢快速接头的使用注意事项1。请不要将其用于流体以外的其他流体。2.使用时不要超过最 高使用压力限制。3。不在使用温度范围外使用，防止密封材料磨损和泄漏。