image.png  NINGBO RUISEN PNEUMATIC HYDRAULIC TECHNOLOGY CO., LTD

image.png  0574- 6222 8836

产品banner
Your current location : Home >> Products >> Stainless Steel Push On Fittings

RNCS Male Straight (BSPT/NPT)

Product attributes

  • Classification:Stainless Steel Push On Fittings
  • Product no. :1572310215
  • Number of visits:0
  • Date of issue:2019-12-04
  • Product overview
  • performance characteristics
  • Technical parameters

RNCS-R、N螺纹快拧直通

Stainless Steel RNCS Male Straight push on fitting is made of 316L stainless steel material for corrosion resistance. Male straight fittings have tube connection on one end, male thread(BSPT/NPT thread) connnectiong on the other end. Sealing and locking the tube by tightening the nut. Tube O.D is available in metric size 4mm to 16mm, inch size 1/8" to 1/2". Thread sizes are available in BSPP, BSPT, NPT 1/8'' to BSPP, BSPT, NPT 1/2''. Ruisen stainless steel fittings are Food Grade,Comply to FDA Standard.


可以直接呼出.2)压缩温度:在压缩变形中使用冷压缩机进行成形,设定温度为室温20,3)凸模进给速度:由于实验中使用了YT32?315四柱油压机,所以该油压压力机的下压速度为5 mm/s。因此,在数值模拟计算中取凸模的进给速度为5 mm/s;4)摩擦条件:剪切摩擦、摩湖州非标不锈钢T型三通擦因子0.08、0.12和0.30分别进行了研究;5)模拟步长:在不锈钢接头体零件扭转的数值模拟中,数广州非标不锈钢Y型三通值模拟步长是决定数值模拟计算时间的两个重要因素之一。在DEFORM-3D的数值模拟中,模拟计算中的步长是Z小单元长度的1/3-1/5,可以认为是测量后确定了0.1 mm/次。6)在模拟计算中,根据金属贯通线软管的挤进变形的特征,设定了使凸模向下运动网格分割后,凹模固定不动.7)管接头零件具有旋转对称性,可以将计算模型简化为整体模型的1/2,即可采取布料的I/2建模。这种简化既可以节省计算时间,又能直观地观察生材的变形情况。

label

Prev:RNEU Union Elbow2019-12-04

Recent:

Record number: Specializing inStainless steel fittings,Welcome to inquire!