image.png  NINGBO RUISEN PNEUMATIC HYDRAULIC TECHNOLOGY CO., LTD

image.png  0574- 6222 8836

产品banner
Your current location : Home >> Products >> Stainless Steel Push In Fittings

RTA Stem Adaptor (BSPP)

Product attributes

  • Classification:Stainless Steel Push In Fittings
  • Product no. :1572248793
  • Number of visits:0
  • Date of issue:2019-11-28
  • Product overview
  • performance characteristics
  • Technical parameters

RTA-G螺旋快插直通

Stainless steel Stem Adaptor push in fittings are made of 316L stainless steel material for corrosion resistance. Stainless steel Stem Adaptor push in fittings have male thread(BSPP thread) on one end, tube connection on the other end. Ruisen stainless steel fittings are Food Grade,Comply to FDA Standard.


 Application:

Stainless Steel fittings are widely used in petrochemical industry, food,beverage and medical machinery, lithium battery equipment, coffee machines, aerospace, automatic packaging, robots, water purifiers, industrial equipment, semiconductors.


,特别是非金属零件、取出O型环时使用专用工具球阀进行组装时,法兰上的螺栓一定是对称的,要逐渐均匀地拧紧。洗涤剂必须与球阀中的橡胶零件、塑料部件、金属零件和工作介质(如气体)等相容。工作介质为气体时,用汽油清洗金属零件。非金属零件可以用浸洗方式清洗用纯净水或酒精清洗分解的单一零件。残留有未被分解的非金属零件的金属零件可以采用干净干净的浸渍标准不锈钢接头剂绢布(为了避免纤维脱落而附着在零件上)进行清洗。清洗时必须将附着在墙面上的油脂、污垢、糨糊、灰尘等非金属零件全部除去,必须立即从清洗剂中取出,长时间浸泡清洗后,洗净面清洗剂挥发后(可以用未浸洗标准快拧接头剂的绢布擦拭)需要组装。不能长时间放置,否则就会生锈。被灰尘污染的新零件在组装之前也需要清洗干净并使用润滑脂润滑。润滑脂必须与球阀金属材料、橡胶零件、塑料零件和工作介质相结合。工作媒体为气体时,例如可以使用特221润滑脂。在密封安装槽表面涂上薄层润滑脂,在橡胶密封上涂上薄层润滑脂、阀杆的密封面及摩擦面涂上薄层润滑脂时,不允许金属屑、纤维、油脂(除规定使用外)灰尘及其他杂质、异物等污染;不允许附着在零件表面上或附着在内腔上或进入内腔。

label

Next:YUS Union Y2019-11-28

Recent:

Record number: Specializing inStainless steel fittings,Welcome to inquire!